Description

Brand: Behringer

Model: FCB1010

Including:

√ 4 x Binaries

√ Documentation about requirements.

Intention:

Mono Tanz provided firmware updates for Drum machines, Synthesizers, Samplers and other Music equipment for many years, both on Reverb and eBay worldwide. We have reached a point, where it is no longer worth to run a store selling eproms with firmware, on portals like Reverb and eBay, as these websites has been widely affected with local, European and international regulations to make the administration burden and existence absurd. We still want to ensure, that end-users still have the ability to update their devices, therefore is availability & knowledge very important.

This is how it works:

1. After the order you will receive the Binary incl. the instructions of what Eprom(s) types you need per download link.
2. You can place an order with the binary at an online-burning service, like buyicnow.com or use your own Eprom burner.

Above will not only give you a lower price point, but also higher quality than any crook-store found on eBay or Reverb etc..

Introduction:

This is firmware update 2.50.1E, Uno and Uno4Kemper and all with latest official released operation systems. This operation system update/upgrade requires one eprom chip.

 

Firmware 2.50.1E features:

• Fixes bugs in FCB1010 with firmware versions 2.4X and earlier.
• improvement to the “on-board” tap tempo function
• 3 new sets of 100 factory presets
• New pedal calibration function.
• New non-latching replay function

 

Firmware Uno 1.0.4 features:

Firmware update Uno is based on the latest official released operation system by Behringer.

• Expression pedals start sending MIDI messages as soon as a movement is detected. Previous firmware versions had some ‘hysteresis’ implemented: when starting a pedal sweep, the pedal needed to move an equivalent of 10 MIDI values before MIDI messages were actually being sent.
• The full MIDI resolution is now used for the transmitted CC messages when moving the expression pedals. In previous firmware versions a pedal sweep resulted in sending only 66% of the available MIDI values.
• CC values 0 and 127 are now guaranteed to be sent by the expression pedals after correct calibration. In previous firmware versions, even after perfect calibration is was possible that the 0 or 127 values were never sent.

 

Firmware Uno 4 Kemper 1.4 features:

UnO for KEMPER firmware EPROM is by far the most cost effective way to get hold of a dedicated foot controller for your Kemper Profiling Amp. Indeed, this firmware EPROM, which was designed in full cooperation with the Kemper R&D team, turns your Behringer FCB1010 floorboard into a dedicated controller for the KPA. The advantages of such dedicated controller, compared to the regular FCB1010, are

• Customizable if needed. With a simple 2-click procedure you specify which stomp switches you want on the floorboard.
• Full 2-way communication with the KPA: the stomp LEDs reflect the correct effect states at all time!
• The KPA tuner is controlled from the FCB1010 and shown on the FCB1010 display!

 

░░░░░░▒▒▒▓▓Why buy from MonoTanz?▓▓▒▒▒░░░░░░

⸎ Many years experience with Eproms and binaries

⸎ Free technical support. [English, German and Danish]

► Summa summārum: We provide a good product with confidence, transparency and honesty, which will improve the functionality of your equipment.

░░░░░░▒▒▒▓▓Important notes/Disclaimer:▓▓▒▒▒░░░░░░

⸎ This is the binary only, no eprom is included and therfore in the nature of the product, can refunds not be executed.

⸎ Backup any data you don’t want to lose before starting. Factory Reset is often required, when you replace the firmware to flush-out data from the old system.

⸎ Before buying, please check that you dont already have the same firmware version installed.

⸎ Please feel free to drop us a message here, per mail or over our Facebook Chat, if you have any problems or questions.